Phila. MG Club FB page
Just a suggestion from
I think the club should start a Facebook page much easier to communicate with one another and share pictures.Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the carNilsOn Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:Dear Clubbed,
Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
Just sayin’
Larry
--
Larry B. Macy, Ph.D.
macy@...
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
“I don’t know where I’m going from here, but I promise it won’t be boring
David Bowie - 1998
Jim,Kristi set up a FB page awhile ago. Check it out.Steve
On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:Just a suggestion from
I think the club should start a Facebook page much easier to communicate with one another and share pictures.Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the carNilsOn Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:Dear Clubbed,
Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
Just sayin’
Larry
--
Larry B. Macy, Ph.D.
macy@...
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
“I don’t know where I’m going from here, but I promise it won’t be boring
David Bowie - 1998
Jim,Kristi set up a FB page awhile ago. Check it out.Steve
On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:Just a suggestion from
I think the club should start a Facebook page much easier to communicate with one another and share pictures.Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the carNilsOn Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:Dear Clubbed,
Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
Just sayin’
Larry
--
Larry B. Macy, Ph.D.
macy@...
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
“I don’t know where I’m going from here, but I promise it won’t be boring
David Bowie - 1998
Thanks Steve, I did check it out doesn't look like anyone has been posting on it for sometime. One guy was asking where he should send his dues and no one commented.
On Wednesday, May 4, 2016, 11:46 AM, Steve Harding mgbgt1@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Jim,Kristi set up a FB page awhile ago. Check it out.Steve
On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:Just a suggestion from
I think the club should start a Facebook page much easier to communicate with one another and share pictures.Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the carNilsOn Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:Dear Clubbed,
Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
Just sayin’
Larry
--
Larry B. Macy, Ph.D.
macy@...
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
“I don’t know where I’m going from here, but I promise it won’t be boring
David Bowie - 1998
From: Steve Harding mgbgt1@... [Philly_MG_Club]
To: Philly_MG_Club
Sent: Wed, May 4, 2016 11:39 am
Subject: [Philly_MG_Club] Phila. MG Club FB page
On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Just a suggestion fromI think the club should start a Facebook page much easier to communicate with one another and share pictures.Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.
On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the carNils
On Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:Dear Clubbed,
Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
Just sayin’
Larry
--
Larry B. Macy, Ph.D.
macy@...
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
“I don’t know where I’m going from here, but I promise it won’t be boring
David Bowie - 1998
What's facebook?Gordon-----Original Message-----
From: Steve Harding mgbgt1@... [Philly_MG_Club] <Philly_MG_Club@...>
To: Philly_MG_Club <Philly_MG_Club@...>
Sent: Wed, May 4, 2016 11:39 am
Subject: [Philly_MG_Club] Phila. MG Club FB page
Jim,Kristi set up a FB page awhile ago. Check it out.Steve
On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Just a suggestion fromI think the club should start a Facebook page much easier to communicate with one another and share pictures.Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.
On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the carNils
On Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:Dear Clubbed,
Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
Just sayin’
Larry
--
Larry B. Macy, Ph.D.
macy@...
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
“I don’t know where I’m going from here, but I promise it won’t be boring
David Bowie - 1998
Who is going to the car show in Succasunna, NJ on Saturday?
Karen Schulte
Sent: Wednesday, May 4, 2016 11:56:32 AM
To: Philly_MG_Club@...
Subject: Re: [Philly_MG_Club] Phila. MG Club FB page
Jim,Kristi set up a FB page awhile ago. Check it out.Steve
On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Just a suggestion from
I think the club should start a Facebook page much easier to communicate with one another and share pictures.Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.
On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the carNils
On Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Dear Clubbed,
Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
Just sayin’
Larry
--
Larry B. Macy, Ph.D.
macy@...
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
“I don’t know where I’m going from here, but I promise it won’t be boring
David Bowie - 1998
Who is going to the car show in Succasunna, NJ on Saturday?
Karen Schulte
From: Philly_MG_Club@... <Philly_MG_Club@...> on behalf of Martin Cameron cameronm139@... [Philly_MG_Club] <Philly_MG_Club@...>
Sent: Wednesday, May 4, 2016 11:56:32 AM
To: Philly_MG_Club@...
Subject: Re: [Philly_MG_Club] Phila. MG Club FB pageBut you can't select it as a friend and it's not a group. I had to save the link instead
For the DVT they have created a group which works in my view much better
Jim,Kristi set up a FB page awhile ago. Check it out.Steve
On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Just a suggestion from
I think the club should start a Facebook page much easier to communicate with one another and share pictures.Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.
On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the carNils
On Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Dear Clubbed,
Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
Just sayin’
Larry
--
Larry B. Macy, Ph.D.
macy@...
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
“I don’t know where I’m going from here, but I promise it won’t be boring
David Bowie - 1998
So apparently when I set up the club Facebook page I set it up so that you have to “like” the page instead of joining the group. Without deleting and restarting the page I cannot adjust the settings so that people can “join” the group. I hope that helps explain some of the issues with the Facebook page.
On a side note if you look at my signature I have always “advertised” that we have a Facebook page. The traffic on the site is very low and unfortunately I cannot figure out how to allow people to post on the actual timeline without making every single person a moderator of the page. All of the posts/comments go to the left hand side as Visitor posts. That being said I would be happy to have a couple of people who would be willing to become moderators so that we can possibly have more posts/activity on the timeline.
I do ask that if anyone has any further questions or anything about the Facebook page that they direct them to me personally via my email (kliebel@...).
Thank you for your understanding,
Kristi
Kristi & Lambert
'74 RWA Midget
'77 RB Midget
'71 Morris 1100 MK 2
Philadelphia MG Club Treasurer
Brits at the Village Registrar
Check out Philadelphia MG Club on Facebook
“It is good to have an end to a journey … But it is the journey that matters in the end.” ~ Ursula K. Leguin
On May 4, 2016, at 6:14 PM, Karen Schulte mgbbabe1970@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Who is going to the car show in Succasunna, NJ on Saturday?
Karen Schulte
From: Philly_MG_Club@... <Philly_MG_Club@...> on behalf of Martin Cameron cameronm139@...[Philly_MG_Club] <Philly_MG_Club@...>
Sent: Wednesday, May 4, 2016 11:56:32 AM
To: Philly_MG_Club@...
Subject: Re: [Philly_MG_Club] Phila. MG Club FB page
But you can't select it as a friend and it's not a group. I had to save the link instead
For the DVT they have created a group which works in my view much better
Sent from my iPhone
On May 4, 2016, at 11:39 AM, Steve Harding mgbgt1@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Jim,
Kristi set up a FB page awhile ago. Check it out.
Steve
Sent from my iPhone
On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Just a suggestion from
jpwinesplumbing@...
I think the club should start a Facebook page much easier to communicate with one another and share pictures.
Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.
Sent from Yahoo Mail for iPhone
On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the car
Nils
On Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Dear Clubbed,
Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
Just sayin’
Larry
--
Larry B. Macy, Ph.D.
macy@...
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
“I don’t know where I’m going from here, but I promise it won’t be boring
David Bowie - 1998
Hi all,
So apparently when I set up the club Facebook page I set it up so that you have to “like” the page instead of joining the group. Without deleting and restarting the page I cannot adjust the settings so that people can “join” the group. I hope that helps explain some of the issues with the Facebook page.
On a side note if you look at my signature I have always “advertised” that we have a Facebook page. The traffic on the site is very low and unfortunately I cannot figure out how to allow people to post on the actual timeline without making every single person a moderator of the page. All of the posts/comments go to the left hand side as Visitor posts. That being said I would be happy to have a couple of people who would be willing to become moderators so that we can possibly have more posts/activity on the timeline.
I do ask that if anyone has any further questions or anything about the Facebook page that they direct them to me personally via my email (kliebel@...).
Thank you for your understanding,
Kristi
Kristi & Lambert
'74 RWA Midget
'77 RB Midget
'71 Morris 1100 MK 2
Philadelphia MG Club Treasurer
Brits at the Village Registrar
Check out Philadelphia MG Club on Facebook
“It is good to have an end to a journey … But it is the journey that matters in the end.” ~ Ursula K. Leguin
> On May 4, 2016, at 6:14 PM, Karen Schulte mgbbabe1970@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
>
>
> Who is going to the car show in Succasunna, NJ on Saturday?
> Karen Schulte
>
> From: Philly_MG_Club@... <Philly_MG_Club@...> on behalf of Martin Cameron cameronm139@...[Philly_MG_Club] <Philly_MG_Club@...>
> Sent: Wednesday, May 4, 2016 11:56:32 AM
> To: Philly_MG_Club@...
> Subject: Re: [Philly_MG_Club] Phila. MG Club FB page
>
>
>
> But you can't select it as a friend and it's not a group. I had to save the link instead
>
> For the DVT they have created a group which works in my view much better
>
>
>
> Sent from my iPhone
>
> On May 4, 2016, at 11:39 AM, Steve Harding mgbgt1@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
>
>>
>>
>> Jim,
>> Kristi set up a FB page awhile ago. Check it out.
>> Steve
>>
>> Sent from my iPhone
>>
>> On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
>>
>>>
>>> Just a suggestion from
>>>
>>> jpwinesplumbing@...
>>> I think the club should start a Facebook page much easier to communicate with one another and share pictures.
>>> Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.
>>>
>>>
>>> Sent from Yahoo Mail for iPhone
>>>
>>> On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
>>>
>>>
>>>
>>> I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the car
>>> Nils
>>>
>>>
>>> On Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
>>>
>>> Dear Clubbed,
>>>
>>> Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
>>>
>>> Just sayin’
>>>
>>> Larry
>>>
>>> --
>>>
>>> Larry B. Macy, Ph.D.
>>> macy@...
>>> System Manager/Administrator
>>> Neuropsychiatry Section
>>> Department of Psychiatry
>>> University of Pennsylvania
>>> 3400 Spruce St. - 10 Gates
>>> Philadelphia, PA 19104
>>>
>>> “I don’t know where I’m going from here, but I promise it won’t be boring
>>> David Bowie - 1998
>>>
>>>
>>>
>>>
>>>
>>>
>>
>
>
>
Mary Goodman started a FB page out of nowhere and now has 227 members who contribute to it. It's called British car and motorcycle enthusiasts. A Global organization. It's a closed group that you have to request membership. So most people who contribute love and want to see all the posts. Check it out.
Hi all,
So apparently when I set up the club Facebook page I set it up so that you have to “like” the page instead of joining the group. Without deleting and restarting the page I cannot adjust the settings so that people can “join” the group. I hope that helps explain some of the issues with the Facebook page.
On a side note if you look at my signature I have always “advertised” that we have a Facebook page. The traffic on the site is very low and unfortunately I cannot figure out how to allow people to post on the actual timeline without making every single person a moderator of the page. All of the posts/comments go to the left hand side as Visitor posts. That being said I would be happy to have a couple of people who would be willing to become moderators so that we can possibly have more posts/activity on the timeline.
I do ask that if anyone has any further questions or anything about the Facebook page that they direct them to me personally via my email (kliebel@...).
Thank you for your understanding,
Kristi
Kristi & Lambert
'74 RWA Midget
'77 RB Midget
'71 Morris 1100 MK 2
Philadelphia MG Club Treasurer
Brits at the Village Registrar
Check out Philadelphia MG Club on Facebook
“It is good to have an end to a journey … But it is the journey that matters in the end.” ~ Ursula K. Leguin
> On May 4, 2016, at 6:14 PM, Karen Schulte mgbbabe1970@... [Philly_MG_Club] wrote:
>
>
> Who is going to the car show in Succasunna, NJ on Saturday?
> Karen Schulte
>
> From: Philly_MG_Club@... on behalf of Martin Cameron cameronm139@...[Philly_MG_Club]
> Sent: Wednesday, May 4, 2016 11:56:32 AM
> To: Philly_MG_Club@...
> Subject: Re: [Philly_MG_Club] Phila. MG Club FB page
>
>
>
> But you can't select it as a friend and it's not a group. I had to save the link instead
>
> For the DVT they have created a group which works in my view much better
>
>
>
>
>
> On May 4, 2016, at 11:39 AM, Steve Harding mgbgt1@... [Philly_MG_Club] wrote:
>
>>
>>
>> Jim,
>> Kristi set up a FB page awhile ago. Check it out.
>> Steve
>>
>>
>>
>> On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] wrote:
>>
>>>
>>> Just a suggestion from
>>>
>>> jpwinesplumbing@...
>>> I think the club should start a Facebook page much easier to communicate with one another and share pictures.
>>> Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.
>>>
>>>
>>>
>>>
>>> On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] wrote:
>>>
>>>
>>>
>>> I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the car
>>> Nils
>>>
>>>
>>> On Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] wrote:
>>>
>>> Dear Clubbed,
>>>
>>> Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
>>>
>>> Just sayin’
>>>
>>> Larry
>>>
>>> --
>>>
>>> Larry B. Macy, Ph.D.
>>> macy@...
>>> System Manager/Administrator
>>> Neuropsychiatry Section
>>> Department of Psychiatry
>>> University of Pennsylvania
>>> 3400 Spruce St. - 10 Gates
>>> Philadelphia, PA 19104
>>>
>>> “I don’t know where I’m going from here, but I promise it won’t be boring
>>> David Bowie - 1998
>>>
>>>
>>>
>>>
>>>
>>>
>>
>
>
>
We have JD and taking the GT.
I looked and it was 1 hr and 46 minutes from our house...
Text me if your define maybe changes to a yes.
Karen
Sent: Wednesday, May 4, 2016 6:19:05 PM
To: Philly_MG_Club@...
Subject: Re: [Philly_MG_Club] Phila. MG Club FB page
On May 4, 2016, at 6:14 PM, Karen Schulte mgbbabe1970@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Who is going to the car show in Succasunna, NJ on Saturday?
Karen Schulte
From: Philly_MG_Club@... <Philly_MG_Club@...> on behalf of Martin Cameron cameronm139@... [Philly_MG_Club] <Philly_MG_Club@...>
Sent: Wednesday, May 4, 2016 11:56:32 AM
To: Philly_MG_Club@...
Subject: Re: [Philly_MG_Club] Phila. MG Club FB pageBut you can't select it as a friend and it's not a group. I had to save the link instead
For the DVT they have created a group which works in my view much better
Jim,Kristi set up a FB page awhile ago. Check it out.Steve
On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Just a suggestion from
I think the club should start a Facebook page much easier to communicate with one another and share pictures.Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.
On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the carNils
On Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Dear Clubbed,
Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
Just sayin’
Larry
--
Larry B. Macy, Ph.D.
macy@...
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
“I don’t know where I’m going from here, but I promise it won’t be boring
David Bowie - 1998
Lester
Karen,I'm a definite maybe!Steve
On May 4, 2016, at 6:14 PM, Karen Schulte mgbbabe1970@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Who is going to the car show in Succasunna, NJ on Saturday?
Karen Schulte
From: Philly_MG_Club@... <Philly_MG_Club@...> on behalf of Martin Cameron cameronm139@... [Philly_MG_Club] <Philly_MG_Club@...>
Sent: Wednesday, May 4, 2016 11:56:32 AM
To: Philly_MG_Club@...
Subject: Re: [Philly_MG_Club] Phila. MG Club FB pageBut you can't select it as a friend and it's not a group. I had to save the link instead
For the DVT they have created a group which works in my view much better
Jim,Kristi set up a FB page awhile ago. Check it out.Steve
On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Just a suggestion from
I think the club should start a Facebook page much easier to communicate with one another and share pictures.Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.
On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the carNils
On Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
Dear Clubbed,
Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
Just sayin’
Larry
--
Larry B. Macy, Ph.D.
macy@...
System Manager/Administrator
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104
“I don’t know where I’m going from here, but I promise it won’t be boring
David Bowie - 1998
My comment is if there is little traffic on the club FB page then it must not be club friendly. I know there are some Libertarians in the club that don't like FB and that certainly is there choice. But those that do like it should have a site that is more club friendly to use.Jim
On May 4, 2016, at 7:19 PM, Kristi & Lambert kristi74midget@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:Hi all,
So apparently when I set up the club Facebook page I set it up so that you have to “like” the page instead of joining the group. Without deleting and restarting the page I cannot adjust the settings so that people can “join” the group. I hope that helps explain some of the issues with the Facebook page.
On a side note if you look at my signature I have always “advertised” that we have a Facebook page. The traffic on the site is very low and unfortunately I cannot figure out how to allow people to post on the actual timeline without making every single person a moderator of the page. All of the posts/comments go to the left hand side as Visitor posts. That being said I would be happy to have a couple of people who would be willing to become moderators so that we can possibly have more posts/activity on the timeline.
I do ask that if anyone has any further questions or anything about the Facebook page that they direct them to me personally via my email (kliebel@...).
Thank you for your understanding,
Kristi
Kristi & Lambert
'74 RWA Midget
'77 RB Midget
'71 Morris 1100 MK 2
Philadelphia MG Club Treasurer
Brits at the Village Registrar
Check out Philadelphia MG Club on Facebook
“It is good to have an end to a journey … But it is the journey that matters in the end.” ~ Ursula K. Leguin
> On May 4, 2016, at 6:14 PM, Karen Schulte mgbbabe1970@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
>
>
> Who is going to the car show in Succasunna, NJ on Saturday?
> Karen Schulte
>
> From: Philly_MG_Club@... <Philly_MG_Club@...> on behalf of Martin Cameron cameronm139@...[Philly_MG_Club] <Philly_MG_Club@...>
> Sent: Wednesday, May 4, 2016 11:56:32 AM
> To: Philly_MG_Club@...
> Subject: Re: [Philly_MG_Club] Phila. MG Club FB page
>
>
>
> But you can't select it as a friend and it's not a group. I had to save the link instead
>
> For the DVT they have created a group which works in my view much better
>
>
>
>
>
> On May 4, 2016, at 11:39 AM, Steve Harding mgbgt1@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
>
>>
>>
>> Jim,
>> Kristi set up a FB page awhile ago. Check it out.
>> Steve
>>
>>
>>
>> On May 4, 2016, at 11:30 AM, James Wines jpwinesplumbing@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
>>
>>>
>>> Just a suggestion from
>>>
>>> jpwinesplumbing@...
>>> I think the club should start a Facebook page much easier to communicate with one another and share pictures.
>>> Also a reply to Nils try a set of chrome 72 spoke I've had my B to 110 on 95. Smooth sailing.
>>>
>>>
>>> Sent from Yahoo Mail for iPhone
>>>
>>> On Wednesday, May 4, 2016, 11:17 AM, Nils Ny ny.nils@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
>>>
>>>
>>>
>>> I wish my MGB could go 70 mph without the wire wheels feeling like they are going to shake right off the car
>>> Nils
>>>
>>>
>>> On Wed, May 4, 2016 at 11:08 AM, Larry Macy lmacy@... [Philly_MG_Club] <Philly_MG_Club@...> wrote:
>>>
>>> Dear Clubbed,
>>>
>>> Did anyone notice the “new” speed limit on the PA turnpike recently?? I have no idea when it was changed or how far it goes, but between Rt 1 (exit 351) and the Norristown, Plymouth Meeting exit (333?) the speed limit is now 70 MPH instead of the former 65.
>>>
>>> Just sayin’
>>>
>>> Larry
>>>
>>> --
>>>
>>> Larry B. Macy, Ph.D.
>>> macy@...
>>> System Manager/Administrator
>>> Neuropsychiatry Section
>>> Department of Psychiatry
>>> University of Pennsylvania
>>> 3400 Spruce St. - 10 Gates
>>> Philadelphia, PA 19104
>>>
>>> “I don’t know where I’m going from here, but I promise it won’t be boring
>>> David Bowie - 1998
>>>
>>>
>>>
>>>
>>>
>>>
>>
>
>
>
From: "Gdangelo6118@... [Philly_MG_Club]"
Date: 05/07/2016 4:57 AM (GMT-05:00)
To: Philly_MG_Club@...
Subject: Re: [Philly_MG_Club] Phila. MG Club FB page
I'm not sure who I am sending this to because I usually never use my phone to answer e mail. But even though our GT is not really finished, Lori and I are going to NJ.
Gerard. 🚁